Bantam R30 - MIL digital Servocontroller

A brand new member is the new analog servo amplifier module of Copley for plugging into PCBs -  BANTAM R30:

  • pluggable module in enclosed housing
  • for DC-brushed and brushless motors
  • digital hall-effects for trapezoidal commutation
  • current control
  • analog +/-10V or PWM command
  • analog current monitor output 
  • 2 versions: 20 to 55Vdc, 10A cont. or 20 to 90Vdc, 5A cont. 
  • current setting by external resistors or voltage (both in customer electronics)
  • electronic parameter setting (in the factory)
  • development kit available

The Bantam R30 drive and has the same functionality as the industrial but also matches higher specification concerning:

  • ambient temperature: -40 to 70°C (storage -50 to +85°C)
  • thermal shock: -40 to +70°C in 1 minute
  • relative humidity: 95% non-condensing at 60°C
  • vibration: 5 to 500 Hz, up to 3.85 grms
  • shock: 40g peak acceleration (storage 75g peak acceleration)
  • altitude: -400 to 5,000m (Storage -400 to +12,000m)
  • MIL-STD-specification: MIL-STD-810, MIL-STD-1275, MIL-STD-704, MIL-STD-461, MIL-STD-1399
  • IEC specification: IEC-60079, IEC-60068